Tuesday, July 08, 2014

Tamlanding: Update



Current state of the beast......
Today I decided to give an update on the Tamland and specifically on components which have seen a lot of miles by now. Some things have been changed out since this update was posted.

The bike overall has been great, and if you want to read more about that, see this post I wrote back in May. Otherwise, let's talk about some of the changes first....

The saddle that came stock with this bike was decent, but I was finding that after about 50 miles it wasn't very pleasant to sit on anymore. So, I tried this Ergon saddle and I have to say that it wasn't "love at first sitting", but I have come around to liking it just fine. The feeling was reinforced on my last ride when I found that I really needed to be a bit further back in the "pocket" of this saddle where it just hit me "right" and I was really satisfied with that. The issue has been a stem that is a hair too long, so you can probably guess one of my next upgrades!

I've been very happy with these brakes.
I also changed out the big ring as has been documented here previously and that has really been a big plus with regard to riding around on the gravel roads here. More on gearing in a minute.....

The TRP Spyre brakes are literally the next evolution in mechanical disc brakes and should have been done five years or more ago. The modulation with the Shimano Ultegra 11's brifter levers is firm, but very good feeling. Power aplenty here. Really, I couldn't even begin to delve into how well these work on gravel, because they are overkill. On pavement though, I have had opportunity to really have to get on them, and they shine as good as many hydro brakes. One thing I've found is that many brakes of the disc persuasion tend to get grabby when they heat up. Sometimes you can predict this and let off the lever pressure a bit, but some brakes aren't quite so predictable. The TRP's are pretty consistent, so I haven't been annoyed by the grabby when hot issue.

They will make a whistle noise- high pitched whining- sometimes. Not always, but mostly they are quiet and very powerful for mech disc brakes. The trouble is that these have come out right at the dawning of drop bar hydro levers and will soon be extinct. Too bad. It's a great design. 

Now a word on gearing: The Ultegra 11's are pretty new. There aren't any good alternative 11 speed mtb cassettes out now either. This means that I am limited to the 32T low gear here. Seriously, I will admit to this being a totally mental issue. I have nearly the same exact set up in 9 speed on the BMC "Orange Crush" bike and almost never use the lowest gears. That cassette does have a 34T and it remains pretty unused and dirty! I just need to buckle up and pedal this bike up some steeps and get over this, but I do wish that a 34T was available, just because!

Changes: While I am really close to being "dialed" on this rig, I do want to try a bit shorter stem, a lighter, maybe more compliant seat post, and top of the list is new wheels. The stock Tamland Two wheels are solid, workhorse wheels, but they are on the heavy end of the spectrum. I'll be cooking up an alternative soon.

5 comments:

Exhausted_Auk said...

My main gripe on 11-speed gearing is the lack of availability of a 12-up cassette. I don't use anything with an 11 cog, so going to 11-speed for me makes no sense until there are better cassette choices, such as 12-30 or 12-32. I could go to Campy, but their widest cassette is a 12-29.

TW said...

GT I'm running some American Classic wheels that may be up your alley. I had AC build me a set of wheels with their 101 rims laced to their 225 Disc hubs. Great weight with a little wider rim than the Argent and Hurricane wheel sets.

CJ said...

G-Ted,

Do you think there is enough aftermarket demand for the road version of the Sprye brakes to keep them alive for many moons?

I wonder if the Sprye brakes are as good as you say they are, if the real doe doe bird of the mechanical disc brakes is the BB7?

Guitar Ted said...

@CJ- It depends on if the OEM's pick up on the Spyre for entry to mid-level road bikes. If they do, then yes. I agree that the BB-7 is long in the tooth and ready for evolution/extinction soon.

Barturtle said...

I'll be picking up my Tamland 1 next month and am having some similar concerns regarding gearing and wheels. 50/34 likely too tall. Probably give a 46/34 a try. Ellis Cycles had his Strada Fango at Almanzo and he had managed to get DA derailleurs to shift XTR cranks, if the 46/34 doesn't cut it, I may try something along those lines, as I'd rather closely spaced cogs with smaller rings than a wide range cassette with huge jumps between gears.

Any chance you've checked to see if the HED Ardennes+ will clear the Spyre brakes?